High temperature spray paint Pintyplus Tech

High temperature spray paint Pintyplus Tech for supports exposed to high temperatures. The colors withstand temperatures up to 600ºC.

Applications for the high temperature spray paint

Ideal for use on surfaces liable to withstand high temperatures: exhaust pipes, heaters, etc.

Technical characteristics

• Size 270/200ml and 520/400ml
• Spreading 200ml = 1 m2. 400ml = 2 m2
• Surface drying (20ºC) time in 30 minutes, total 1 hour.
• Repainted after 30 minutes.
• Heat resistance 600ºC.

How to apply the high temperature spray paint

The surface to be painted must be clean, dry and free of any contaminants. Clean the rust and the scales, if any, with a wire brush. Remove grease stains with solvent.

For rusted surfaces, apply a layer of Zinc Primer Pintyplus or Cold galvanizing Pintyplus.

Shake the can vigorously during 1 minute after the mixing balls sound. Spray from a distance of 25/30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint sags. Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to prevent nozzle clogging.

Important: after applying the paint, the temperature of the painted surface must be increased gradually to reach its maximum enabling the paint to crosslink.

Tips for the Pintyplus high temperature paint

On painted surfaces, if properly adhered proceed with a light sanding to facilitate adherence. If poorly adhered, remove it with the Tech Paint Stripper o similar.

Do not use on devices connected to the electrical network and apply in ventilated areas.

Once empty, the spray must be deposited in the yellow container.